Aluminium

ALUMINIUM:
Aluminium, Aluminium Bronze, Manganeese Bronze

FORMS :
Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes

ROLLED PRODUCTS SHEET COIL PLATE BUILDING (ROOFING) SHEET TREAD / CHEQURED/FLOORING SHEET & PLATE STUCO SHEET & COIL CLOSURE STOCK FOIL CLOSURE / FIN STOCK
EXTRUDED PRODUCTS ROD FLAT BAR SQAURE BAR HEX BAR ROUND TUBE SQAURE TUBE RECTANGULAR TUBE ANGLE CHANNEL I BEAM T SECTION OVAL TUBE TRANPORT PROFILE ARCHITECTURAL /BUILDING PFOFILE BUS BAR & TUBULAR HEAT SINK INDUSTRIAL PROFILE CUSTOMISE/SPECIAL PROFILE

Brass

We offer excellent quality Brass Sheets and Plates as per the demand of the customer. The Brass Roofing Sheets manufactured by our company are available in various compositions like 70-30, 63-37, 60-40. The hardness and size of brass sheets provided by us may differ depending on the requirement of the customer. We offer best quality brass sheets at nominal charges and are known widely as one of the well known Polished Brass Plate Manufacturers in the market.

BRASS:
Free Cutting Brass, Leading Brass, Foreign Brass, Reviting Brass, Lead Free Brass, Neval Brass.

FORMS :
Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes.

Specifications

Size : 1000mm to 2500mm

Thickness : 0.3mm to 25mm

Standard Sizes	Thickness
1000mm × 2000mm	1.2mm to 16mm
1250mm × 1250mm	1.2mm to 25mm
1250mm × 1250mm	1.2mm to 12mm
14" × 48"	0.3mm to 25mm

Copper

  Leading Manufacturer and Exporter of Copper Products such as Copper Pipes, Copper Tubes, Copper Foils, Copper Rods, Copper Flats and Copper Butt Weld Fittings from Mumbai. Where low maintenance and corrosion resistance is required, stainless steel plates are a natural choice and are used in a diverse range of applications from modern architecture for cladding or fascias, to the food hygiene industry due to its anti-bacterial qualities.

Copper
Electrolytic Copper, Electrolytic Tough Pitch Copper, Deoxidised Copper, General Purpose Commercial Copper.

FORMS :
Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes

Dimensional parameters
Type	Dimensional yardstick
sheets	Standard Size: 14" x 48" / 356.00 mm x 1220.00 mm Length : 14" / 356.00 mm Width : 48" / 1220.00 mm Thickness : 0.20 mm - 6.00 mm
cut length	All customized as per the customer's requirements Length : Upto 2000.00 mm Width : Upto 610.00 mm Thickness : 0.20 mm - 6.00 mm
coils	Standard Size : 14" / 356.00 mm Length : Running (as per the customer's requirement) Width : 14" / 356.00 mm Thickness : 0.045 mm - 2.30 mm
strips	Standard Size : 14" / 356.00 mm Length : Running (as per the customer's requirement) Width : 8.00 mm - 400.00 mm Thickness : 0.045 mm - 2.30 mm
circles	All customized as per the customer's requirement Diameter : Upto 26" / 660.00 mm > Thickness : 0.50 mm - 2.50 mm
pharmas	All customized as per the customer's requirementin different shapes for eg. Stars, oval, etc.

Gunmetal, Phosphor Bronze

 Our company is highly acclaimed in offering a wide range of PhosphorBronze. 

The specifications of this product include :
BS2870 / BS2875 : PB103 - BS2874 : PB102 - NES838 BS2874 : PB104/ BS B24 (DTD265A*) (Colbronze) - BS1400 : PB1 ASTM B139 : C54400 (Colphos 90).

 

Phosphor Bronzes, more accurately described as Tin Bronzes, are alloys of copper where tin is the main alloying element with phosphorus added primarily as a deoxidant. Alloys containing up to about 9% tin are wrought. Alloys containing from about 10-12% tin are used as-cast. They are strong, corrosion resistant alloys with many traditional uses in marine environments and in electrical and electronic engineering where their especially at the higher cast level, imparts good wear resistance for traditional use in bearing components.

Chemical Composition :

Cu	Remainder
Sn	4.00 - 5.50
Pb	0.02 Max.
Ni	0.30 Max.
Fe	0.10 Max.
Zn	0.30 Max.
P	0.02 - 0.40
Total Impurities	0.50 Max.

Mechanical Properties :

%Elongation at 5.65Sq.Rt So G.L.	12.00 Min.
U.T.S. N/mm Sq.	500 Min.
0.2% P.S. N/mm sqr.	410 Min.
Size	Over 6 mm to 18 mm